How to Install Carpet?

Carpet makes a room feel glorious, soft and beautiful. It looks great and feels comfortable under your feet. Kids can play on it safely. It also helps keep the room quiet. Many people ask, “How to install carpet in Dubai?” You can do it yourself with a simple guide. You just need the right tools and simple tips. This blog from Carpet Floor will help you. Read the complete blog carefully.

Carpet gives a soft feel. It keeps your feet warm in winter. It makes your room look rich and cozy. It reduces noise. It is safe for kids. You do not need to hire a worker. You can save money. Just read the steps carefully.

When purchasing carpets for living room, you need to measure the whole length of your living room or bedroom. Do not purchase on your own assumption. If you buy without measuring your room, your carpet is a waste. This is a very important step. Do not guess the size own. Always measure your room before making a purchase.
How to measure:

• Measure your entire room with tape measure.
• Measure complete length of your living space.
• Measure the whole width of your living area where you want to install.
• Multiply length by width for the complete size.

This gives you square feet. Example: If your living room is 12 feet long and 12 feet wide, 12 × 12 = 144 square feet. Add 2 to 4 inches extra on every side. This gives space for trimming. If your room is not a perfect square, divide it into small rectangles. Measure each part of the carpet. Then add all numbers together.

Always buy extra carpet. Do not buy the exact size only. Buy 10% to 20% extra. This helps if you make a mistake. If you are getting a patterned bedroom carpet, buy 5% more than you need. Patterns must match. Extra carpet helps fix problems. It is better to have extra. It is bad to run out of carpet.

You need simple tools. Keep everything ready before you start.

Basic tools:

• Tape measure
• Utility knife
• Chalk line
• Hammer
• Knee kicker
• Power stretcher
• Tack strips
• Staple gun (for wood floor)
• Masonry nails (for concrete)
• Adhesive glue (for concrete)
• Seaming tape
• Seaming iron
• Knee pads
• Stair tool

Make sure all your fixing tools are safe and clean.

Before installing carpet, first clean the entire room.

Do these things:

• Remove all furniture.
• Remove old carpet.
• Pull out old nails.
• Clean the floor.
• Check for cracks.

If the floor is concrete, fill cracks with cement filler. Make the floor smooth. If there is moisture, fix it first. Wet floors damage carpet. The floor must be dry and flat.

Tack strips hold the carpet in place. They are thin strips of wood with small nails.

How to install them:

• Place strips near the wall.
• Leave a small gap from the wall.
• The nails must point toward the wall.

This helps grip the carpet. If the floor is wood: Use nails and a hammer. If the floor is concrete, use glue or masonry nails. Place strips around the whole room. Do not leave gaps.

Carpet Underlay play very important role. Padding goes under the carpet. It makes the carpet soft. It also helps the carpet last longer.

How to install padding:

• Roll padding on the floor.
• Cut it to fit inside the tack strips.
• Do not cover tack strips.
• Staple padding on wood floors.
• Use glue for concrete floors.

Make sure the padding is flat. No bumps. No folds.

Now it is time to cut the carpet. Roll the carpet in the room. Let it rest for a few hours. This helps it relax. Cut carpet bigger than the room. Leave extra on all sides. Do not cut it too short. The short carpet cannot be fixed. Use a sharp utility knife. Cut slowly and carefully.

Start from one wall. Lay the carpet across the room. Push it against the wall. Use chalk to mark edges. Trim extra carpet slowly. Match the direction of fibers. If using two pieces, make sure patterns match. Work carefully. Take your time.

If your room needs two pieces, you must join them.

How to join:

• Place seaming tape under the gap.
• Use a seaming iron to heat tape.
• Press carpet edges together.

Be careful with the hot iron. Do not burn carpet. Press firmly. Make the seam smooth. Let it cool before moving.

This step is very important. Stretching removes wrinkles. Use a knee kicker.

How to stretch:

• Wear knee pads.
• Place the knee kicker near the wall.
• Kick gently with your knee.
• Push carpet into tack strips.

Do this around the whole room. For large rooms, use a power stretcher. It gives better results. The carpet must be tight. No bubbles. No loose areas.

After stretching, trim the extra carpet near the walls. Use a sharp knife. Cut slowly. Tuck carpet edges between the wall and the tack strip. Use a stair tool to push it down. Edges must look neat.

Installing carpet on stairs needs extra care. Measure each step. Cut a carpet piece for each step. Use a staple gun to fix the carpet. Stretch it tight. Make sure the carpet is smooth. No folds. Work step by step and know how to install carpet on stairs​ or how to install carpet on concrete​.

You are almost done. Pick up tools. Remove carpet scraps. Vacuum the carpet. Move furniture back slowly. Do not drag heavy items. Now enjoy your new carpet.

Safety Tips

• Always wear gloves.
• Wear knee pads.
• Keep the knife away from children.
• Work in a well-lit room.
• Take breaks if tired.
• Safety is very necessary.

Do not skip measuring. Do not cut carpet too short. Do not forget padding. Do not leave wrinkles. Do not ignore moisture problems. Fix problems before installing.

You save money. You learn a new skill. You feel proud. You control quality. You can work at your own speed. It may take time. But it is possible.

Installing mosque carpet is not very hard. It just needs patience. Measure carefully. Buy extra carpet. Prepare the floor well. Install tack strips. Lay padding. Cut and place carpet. Seal seams. Stretch it tight. Trim edges. Clean the room. Follow each step slowly. Do not rush. Soon, your room will look beautiful. It will feel soft and warm. Now you know how to install carpet. You can do it yourself. Want to know how to install carpet tiles? Contact us for the best tips and tricks.